Maintenance work on the carrier
7.18 Other maintenance work
7 - 124 3 302 577 en Maintenance manual
GMK7450
16.08.2018
Spraying
• Spray the corrosion protection agent on the
underside of the carrier using a spray exten-
sion.
• Clean surfaces sprayed by accident immedi-
ately with water.
• Let the corrosion protection dry for one
hour.
• Check that a transparent waxy protective
film has covered the entire surface.
G
Risk of injury to the eyes!
While working with the spray extension you could be hit by the spray jet or
spray droplets.
Wear protective goggles, protective clothing and gloves.
To Next Page
Loading...
Need help?
General
