MI 2893 / MI 2892 / MI 2885 Remote instrument connection (over Internet / Internet(3G/GPRS) /
Intranet (LAN))
169
Figure 146: Remote Instrument Configuration form
Please click on the “Read” button in order to receive current instrument settings. After retrieving data
from the remote instrument, form should be filled with data, as shown on figure below. Changed
parameters, will be sent back to the instrument by clicking on the “Write” button.
In order to remotely control instrument recorders, please click on the “Recorder” node as shown on
figure below. User can select any of the instrument recorders and configure accompanying parameters.
For description of particular recorder settings, see appropriate section in this manual. Changed
parameters, will be sent back to the instrument by clicking on the “Write” button.
To Next Page
Loading...
Need help?
General
