Operator Maintenance 113
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
7. After that please clean the cover of the developer unit, the
cleaning brush and the sealing welt.
8. Shake the developer bottle several times, open the cap (D)
and tighten the nozzle (E).
Nozzle ( E )
Cap ( D )
Developer bottle ( A )
9. Fill the developer powder completely into the unit and turn
the roll knob (F) counterclo
ckwise during the filling operation.
Developer bottle
Roll knob (F)
10. Remove the potential compensation and fix the cover (C)
and the screws (B) again.
To Next Page
Loading...
