Microplex SOLID F90 HD - Page 138

138 Troubleshooting
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
Error code
[Stack.Com.Err.OR! ]
[E0050 ]
[Stack.Com.Err.PE! ]
[E0051 ]
[Stack.Com.Err.FE! ]
[E0052 ]
[Stack.Com.Err.CE! ]
[E0053 ]
[Stack. Interlock! ]
[E0054 ]
[Stacking Fail.! ]
[E0055 ]
[Stacker Full! ]
[E0056 ]
[Stacker Not Rdy! ]
[E0057 ]
[Stack.NoAutoMode! ]
[E0058 ]
[Stack.Limit Err.! ]
[E0059 ]
[Stacker.Mot.Error! ]
[E005A ]
[Stacker Busy! ]
[E005B ]
[Stack.LowestPos.! ]
[E005C ]
[Stack.Com.T.Out! ]
[E005D ]
Description
Communication error at the power stacker (overrun error)
Communication error at the power stacker (parity error)
Communication error at the power stacker (framing error)
Communication error at the power stacker
Error at the locking device of the power stac
ker
Fanfold paper is not folded
Stacker is full
Stacker is not ready
No auto mode
Stacker capacity is exceeded
Motor rotation is not normal
Power stacker is active
Error at the stacker
Communication error (timeout)