Microplex SOLID F90 HD - Page 142

142 Troubleshooting
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F90 HD Edition 1.0
6. Detach the fanfold paper within the feeding unit at the
perforation and open the paper retaining levers to
remove the jammed paper.
Pull the paper out of the device only in the transport
direction.
Paper retaining levers
7. Detach the fanfold paper in the exit unit section at its
perforation. Remove the jammed paper by
pulli
ng
it out. Pull the paper
out
of the device only in the
transport direction.