MIMAKI JV33-260 - Setting Confirmation Feeding

3-35
Machine settings
1
2
3
Convenient use
5
6
Setting confirmation feeding
Set whether media feeding is performed for checking the result after test printing or not
1
Press the key in the local mode.
2
Select [MACHINE SETUP 2] by pressing the
keys.
3
Press the key twice.
4
Select “ON” by pressing the keys.
• Proceed to the step 7 when “OFF” is selected.
5
Press the key to set [BACK FEED].
6
Select ON/OFF by pressing the keys.
• When the media return feeding is set “ON”, the media fed by the
confirmation feeding is slightly returned.
• If it is not desirable to return the media, set it to “OFF”.
7
Press the key.
8
Press the key several times to end.
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE S E TUP 2 < ENT >
CONF I RM . FEED
FEED :
ON
CONF I RM . FEED
BACK FEED :
ON
CONF I RMAT I ON F EED
BACK FEED :
OFF
MACH I NE S E TUP 2
CONF I RM . FEED < e n t >