5-42
Replacing the cutter blade
The cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).
1
Press the key then press the
key.
• The carriage moves onto the platen.
2
Open the front cover.
3
Replace the cutter unit by the carriage.
(1) Loosen a screw of the cutter unit.
(2) Remove the cutter unit.
(3) Mount a new cutter unit.
(4) Fasten the screw of the cutter unit to secure the cutter unit.
• The blade is sharp. Be careful not to hurt yourself or anyone else.
• Keep the cutter blades away from the reach of children. Be sure to dispose of the worn-out cutter blades
according to the applicable national and local laws and regulations.
• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade.
This will help pick up the cutter blade if it drops.
To Next Page
Loading...
