MIMAKI JV33-260 - Turning the power ON;OFF

2-4
Turning the power ON/OFF
Turning the power ON
The machine is provided with the following two power switches.
Main power switch : At the side of this machine. Keep it "ON" always.
Power switch : Normally, use this switch to turn the power ON/OFF. The power switch lights in green
when the power is ON and blinks in green when it is OFF.
The power switch under the operation panel lights in green when the power is turned
on, and blinks when the power switch is turned off.
The nozzle clogging prevention function is periodically operated even when the power
switch is OFF if the main power switch keeps being ON. (The power switch blinks in
green.)
1
Turn the main power switch ON.
• Set the main power switch located on the side of this machine
to the "I" side.
• The firmware version is displayed when the power is turned on.
• This machine performs initial operation.
2
This machine enters the LOCAL mode.
3
Turn the power of the connected PC ON.
• Turn the power ON after the front cover and maintenance cover are closed.
• The head nozzle may result in nozzle clogging if the main power switch is kept being "OFF" for a long
time.
Main power
switch
JV33-260 V* . * *
Please Wai t
<LOCAL . 1> [ #01 ]