3-42
Switch Setting of Ink Supply Path
For the ink supply, condition of the ink cartridge to be used first by the double-cartridge automatic switching
function can be selected.
This setting is only available for 4-color set.
1
Press the key in the local mode.
2
Select [MACHINE SETUP] by pressing the keys.
3
Press the key.
4
Select [CART.PRIORITY] by pressing the keys.
5
Press the key.
6
Select the condition of ink to be used first by pressing the
keys.
INK LEVEL : Low ink cartridge is used first
EXP. DATE : Close-to-date ink cartridge is used first
7
Press the key.
8
Press the key several times to end.
• When expired ink cartridge is set, the expired cartridge is used first regardless of the setting below.
• When the optional bulk ink system (MBIS1) is used and the MBIS1 is set in both slots, the setting below
is effective.
• When both an ink cartridge and the bulk ink system (MBIS1) are set in the supply paths of the same
color, see the next page.
FUNCT I ON
MACH I NE S E TUP < ENT >
MACH I NE S E TUP
CART . PR I OR I TY < e n t >
CART . PR I OR I TY
SELECT : I NK LEVEL
To Next Page
Loading...
Need help?
General
