Connecting cables
1-11
1
Before Use
3
4
5
6
Removing USB memory
If a USB memory module is inserted in the personal computer to which a JV33 machine is connected, click "Stop"
in the "Safely Remove Hardware" window by following the instructions given there first and then remove the
module.
Leaving a USB memory module inserted can cause [ERROR 10 COMMAND ERROR].
Copy the data onto the hard disk before outputting it for printing.
Connecting the power cable
1
Insert the power cable into an inlet of the machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to this
machine.
3
Insert the power plug into a plug socket.
• Do not use other power cables than the attached power cable.
• Be sure to connect the power cable to the power plug socket near to this machine, and make sure that
the power cable is easily removed.
• Connect the power cable to the grounded plug socket. Otherwise, it may result in fire or an electric
shock.
Inlet Power cable
Cable band
To Next Page
Loading...
Need help?
General
