MIMAKI JV33-260 - Setting the Double Side Mode

4-8
Setting the Double Side Mode
Set for double sided printing.
1
Press key in the local mode.
2
Select [MACHINE SETUP] by pressing the
keys.
3
Press the key.
4
Select [Double Side Mode] by pressing the
keys.
5
Press the key.
6
Press the key.
• The setting “Print Of Back Side” is selected.
7
Select ON by pressing the keys.
• óºSelect ON to print on double side.
8
Press the key.
9
Select [INK LAYERS] by pressing the keys.
10
Press the key.
• The setting “INK LAYERS” is selected.
Setting Description
Print of Back Side Select "ON" to print on the back side.
INK LAYERS Set the number of ink layers to print on the back side.
MEDIA DETECT
When the printing media reaches the specified length, media is detected again to adjust the
media misaligned position by skew or others.
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE S E TUP < ENT >
MACH I NE S E TUP
DEODOR I Z E F AN < e n t >
MACH I NE S E TUP
Doub l eSi de Mode<en t >
Doub l eSi de Mode
Pr intOfBackSide<ent>
Doub l eSi de Mode
Pr intOfBackSide :OFF
Doub l eSi de Mode
Pr intOfBackSide :ON
Doub l eSi de Mode
Pr intOfBackSide<ent>
Doub l eSi de Mode
INK LAYERS <ent>
Doub l eSi de Mode
INK LAYERS :2