3-19
1
2
3
Convenient use
5
6
Setting Priority
For the following items, the priority is selected either the setting by the machine (by the panel) or the setting by
the PC (by the host).
Items to be selected : MEDIA COMP. / HEATER / PRINT MODE / INK LAYERS / DRYING TIME /
AUTO CUT / PRE-FEED / MARGIN / COLOR PATTERN / REFRESH / VACUUM /
FeedSPEED LEVEL
1
Press the key in the local mode.
2
Press the key.
3
Select the type (1-4) by pressing the keys then press the key.
4
Select [PRIORITY] by pressingthe keys.
5
Press the key.
6
Select the set value by pressing the keys.
• Set value : INDIVIDUALLY / ALL HOST / ALL PANEL
• Proceed to the step 7 when [INDIVIDUALLY] is selected.
Press the key then proceed to the step 11 when either [ALL HOST] or [ALL PANEL] is selected.
7
Press the key.
• The setting display for the media compensation is displayed.
8
Select either “HOST” or “PANEL” by pressing the
keys.
9
Press the key.
• You can also press keys to move between items. Be sure to press the key to
register the setting.
10
Set other items by the same operations as the step 8 and 9.
11
Press the key several times to end.
• Even when setting has been made to give priority to the host, the settings made on the machine become
effective if there is no instruction from the host.
[1]
PR I OR I TY < e n t >
[1]PRIORITY
SETUP :
A LL PANEL
[1]PRIORITY
SETUP :
I ND I V I DUA L LY
[1]PRIORITY
MED I A COMP . :
HOST
[1]PRIORITY
MED I A COMP . :
PANEL
To Next Page
Loading...
Need help?
General
