MIMAKI JV33-260 - Initializing the Settings

3-26
Initializing the settings
Initialize the settings to the conditions that have been set when purchased. (Set resetting)
The set resetting can be executed per type.
1
Press the key in the local mode.
2
Press the key.
3
Select the type (1-4) by pressing the keys then press the key
4
Select [SETUP RESET] by pressing the keys.
5
Press the key.
6
Press the key.
• The set is initialized.
7
Press the key several times to end.
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
SETUP RESET < en t >
[ 1 ] SETUP RESET
RESET :
e nt