Other settings
3-25
1
2
3
Convenient use
5
6
Item Outline Set value
Setting of Auto cut Setting whether the media is cut
automatically or not after printing.
ON / OFF
Setting of Pre-feeding Setting whether the media is carried back
and forth or not before printing.
ON / OFF
Setting of Margins Setting a left margin on the media Refer to P.3-18
Setting a right margin on the media
Setting of Color patterns When using other than sublimation transfer
ink, set whether the color pattern will be
drawn on the right edge of the medium.
ON / OFF
When using sublimation transfer ink, set
whether the color pattern will be drawn on
both edges of the medium.
ON / OFF (Right edge)
ONx1 ~ ONx5 / OFF (Left edge)
Setting of Refreshing Setting the refreshing level of head. 0 ~ 3
Setting of Adsorption Setting the force adsorbing a media STRONG / STANDARD
/
Little WEAK / WEAK /OFF
Setting of Feeding speed level Changing the media feeding speed in
printing.
10 ~ 100
~ 200%
Setting of Priority Sets the priority of settings (host / panel) INDIVIDUALLY / ALL HOST
/
ALL PANEL
Setting of Auto cleaning Setting the auto head cleaning operation
performed every printing.
Refer to P.3-20
Setting of In-printing cleaning Setting the auto head cleaning operation
performed during printing.
Refer to P.3-22
Setting of Media detection Setting the media detecting operation. Refer to P.3-23
Setting the detection conditions at the
cutting operation.
Setting of Feed Origin Setting the media feeding direction to LED
pointer when changing the printing origin
position.
ON / OFF
For 6 colorsFor 4 colors
18mm
Origin
Image Image
28 ~ 34mm (ONx1)
84 ~ 90mm (ONx5)
Dead Space
Image
To Next Page
Loading...
