MIMAKI JV33-260 User Manual

6-3
Troubleshooting
1
2
3
4
5
6
Troubleshooting
Media get jammed / media is soiled
Media jamming or stained media is considered to be due to the use of an unsuitable media or improper setting of
media.
[HEAT] or [CONSTANT] LED does not light up
Check the basic operation.
Is a recommended media used ?
Use recommended media.
Is the media not curled or bent ends ?
Avoid using any media with curls or bent ends.
Yes
Is the media hanging down along the
platen ?
Use a take-up device or re-load the media on the
machine. ( P.2-6 , P.2-25)
Is the power to the machine ON ?
Turn on the power to the machine. ( P.2-4)
Yes
Is the heater temperature setting
effective ?
Set the heater temperature. ( P.3-8)
No
No
No
No
No

MIMAKI JV33-260 Specifications

General

Brand	MIMAKI
Model	JV33-260
Category	Printer
Language	English