MIMAKI JV33-260 - Setting Refreshing Interval in Standby Mode

5-29
Setting Routine operations
1
2
3
4
5
Routine Maintenance
Setting Refreshing interval in Standby mode
Set the interval at which refreshing operation is to be performed periodically.
1
Select [ROUTINE SETUP] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [ROUTINE SETUP] by pressing the keys.
(4) Press the key.
2
Select [REFRESH] by pressing the keys.
3
Press the key.
4
Set the refreshing interval by pressing the
keys.
• Set value : OFF, 1 - 168 hours
5
Press the key.
6
Press the key several times to end.
ROUT I NE SETUP
REFRESH < en t >
ROUT I NE SETUP
REFRESH i n t e r v a l =
1 h
ROUT I NE SETUP
REFRESH i n t e r v a l = 1
0 h
ROUT I NE SETUP
REFRESH < en t >