MIMAKI JV33-260 - Page 162

5-28
5
Set the number of scans by pressing the keys.
• Set value : 0 to 9990 times
• When the heater is set at high temperature (around 50 °C) or the ink amount is plenty due to Double
printing or the like, make 30 - 50 times is a standard.
6
Press the key.
7
Press the keys.
• The set display of TEMP difference is displayed.
8
Press the key.
9
Set the temperature difference by pressing the
keys.
• The ROUTINE WIPING function is activated when the setting
temperature of the print heater is higher than the ambient
temperature and the difference is larger than the value of
“TEMP.difference”.
• When setting “0” to the temperature difference, regardless of the set
temperature of the print heater, fixed period wiping operation is
performed when it reaches the specified number of scan.
10
Press the key.
11
Press the key several times to end.
ROUT I NE WI P I NG
SCAN COUNT =
4 0
ROUT I NE WI P I NG
SCAN COUNT < e n t >
ROUT I NE WI P I NG
TEMP.di f ference<ent>
ROUT I NE WI P I NG
TEMP . D i f f e r enc e=2
0 °C
ROUT I NE WI P I NG
TEMP . D i f f e r enc e=2
0 °C
ROUT I NE WI P I NG
TEMP.di f ference<ent>