MIMAKI JV33-260 - Page 154

5-20
7
Set the cleaning solution cartridge to the ink station.
• Absorbing of the cleaning solution is started.
• The display on the right is displayed after absorbing.
8
Remove the cleaning solution cartridge.
• The ink left in the head or tube is discharged to the waste ink tank.
• The right display on the right is displayed after discharging.
• Check the condition of waste ink tank, and then select whether the
washing is terminated or restarted.
• When the washing is restarted, return to the step 5 by pressing the
key.
9
Press the key.
10
Press the key several times to end.
*ABSOPRPTION*
00 : 00
Remo v e : Ca r t r i dge s
1234 5678
*DISCHARGE*
00 : 00
Maint .WashLiquid
END< >D I SCHARGE