7-3
Machine specifications
1
2
3
4
5
Appendix
7
Roll Media size
Maximum 2642mm
Minimum 210mm
Thickness 1.0 mm or less
Roll outside
diameter
250mm or less
Roll weight
*1
100kg or less
Roll inside diameter 3 or 2 inches
Printing surface Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or
weak glue for easy removal.
Leaf media size
Maximum 2642mm
Minimum 210mm
Margin
Leaf media
Left end and right end:25 mm (Default)
Front : 40.0 mm Rear : 98.5 mm
Roll media
Left end and right end :25 mm (Default)
Front : 40.0 mm Rear : 0.0 mm
Distance accuracy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment 2.0mm / 3.0mm (from the platen surface) 2 levels adjustable
Cutting of media
Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type ( 2,000 cc)
Interface USB 2.0
Command MRL- III
Noise
during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous
printing
Less than 65 dB
during
discontinuous
printing
Less than 70 dB
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low
Voltage Directive), CB Report, RoHS
Power
AC100 - 120 ± 10% , AC220 - 240 ± 10% , 50/60Hz ± 1Hz ,
15A or less
Power consumption
*2
1333 W or less
Recomended
Environment
Available temp. 20 °C to 35 °C
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature
change
± 10 °C / h or less
Dust Equivalent to normal office level
Weight 450 kg
Outside
dimensions
Width 2289 mm
Depth 1302 mm
Height 1425 mm
*1. Without deflection of the roll when it is retained at both ends.
*2. Main unit and heater included.
Item JV33-260
To Next Page
Loading...
