2-19
Setting medias
1
2
Basic Operations
5
6
● Installing the counter weight for adjusting the take-up/ feeding tension-bar weight
Install the proper number of the counter weight depending on the media type.
The counter weight can be installed up to 14 pieces.
Media condition Solution
For the strong tension to the media, the media
wrinkles to the feeding direction of the media.
Increase the number of the counter weight to be installed,
depending on the media used.
For the weak tension to the media, the media loosens
and is not taken up finely.
Decrease the number of the counter weight to be installed,
depending on the media used.
• The counter weight is very heavy. Handle it with care.
If your finger or foot is stuck in the weight, you may be injured.
• If the tension-bar is highly lifted, the tension-bar becomes heavy.
(The actual weight of the tension bar is weighted.)
• Not to lose the unused counter weight, put it in the storage box.
To adjust the feeding tension-bar
weight, install the weight on the front of
this machine.
To adjust the take-up tension-bar
weight, install the weight on the
back of this machine.
To Next Page
Loading...
