Head Cleaning
2-39
1
2
Basic Operations
5
6
About warning message display of performing spot color maintenance
When silver ink of ES3 ink is used and when ink has been left for two days and
more without being used, to prevent color heterogeneity due to settling down of
pigment, the message on the right is displayed on the screen.
Silver ink change their colors if they have been left for about two days.
If the warning message is displayed, perform special color mainte-
nance by following the procedures below:
1
If the warning message is displayed, press the key.
• If you do not wish to perform spot color maintenance, press the
key to cancel the operation.
2
Press the key.
3
Remove the ink cartridge of the displayed color on the screen.
• The lamp located above the cartridge lights to inform you of the ink cartridge to be
removed.
• After the ink cartridge is removed, ink discharging starts.
• When discharging is completed, the screen on the
right is displayed.
4
Shake the removed cartridge fifth or sixth times as
the figure.
5
Press the key.
6
Set the cartridge.
• After the cartridge is set, filling starts.
• When filling is completed, the screen returns to
LOCAL.
PERFORM SPOT COLOR
MA I N T ENANCE ? < EN T >
COLOR : S I L VER
REMOVE : I NK CARTR I DGE
_S_W____
*DISCHARGE*
03 : 00
SHAKE I NK CARTR I DGE
:
e
nt
FILLING UP
03 : 00
<LOCAL . 1> [ #01 ]
To Next Page
Loading...
