This section describes the operation procedures for using the
machine more conveniently and each setting procedure.
User type .............................................. 3-2
Registering the drawing conditions
together (Type registration) ..................3-2
Registering Type ..................................3-2
Setting media compensation .............. 3-5
Setting media compensation ................3-5
Changing the set value of Heater ....... 3-8
Changing temperature settings of
Heater ...................................................3-8
Adjusting suitable temperature adjustment
(When solvent ink is used)
.....................3-10
In case the heater temperature is
too low ................................................3-11
Setting print mode ............................. 3-12
Setting of the print quality ...................3-12
Setting scanning direction ..................3-14
Setting Logical-seek ...........................3-15
Setting WhiteLay Print ........................3-16
Setting drying time ............................ 3-17
Setting margins ................................. 3-18
Setting Priority ................................... 3-19
Setting Auto cleaning ........................ 3-20
Setting cleaning while printing ........ 3-22
Setting media detection .................... 3-23
Other settings .................................... 3-24
Initializing the settings ...................... 3-26
Machine settings ............................... 3-27
Setting the deodorize fan ................... 3-28
Perform setting of feeding and
take up ............................................... 3-29
Setting Dryness feeding .................... 3-31
Setting Stamp .................................... 3-32
Setting Test draw arrange ................. 3-33
Change the operation condition of
the ambient temperature ................... 3-34
Setting confirmation feeding .............. 3-35
Setting time ........................................ 3-36
Setting Unit ........................................ 3-37
Setting Machine name ....................... 3-38
Setting Key buzzer ............................ 3-39
Extension of Ink Expiry Month ......... 3-40
Extension of Ink Expiry Month ........... 3-40
Switch Setting of Ink Supply Path ... 3-42
To use sublimation transfer ink with
more stable quality ........................... 3-44
To prevent color change .................... 3-44
Note on head height adjustment ........ 3-45
Confirming machine information ..... 3-46
Displaying Information ....................... 3-46
CHAPTER 3
Convenient use
To Next Page
Loading...
