Chapter 2 Replacement of Maintenance Parts > Miscellaneous>NCU Ink Pad
100
>
R
e
v
2.5.4 NCU Ink Pad
l Procedure
1. Select [Maintenance] > [Station Maint.] > [Carriage Out] > [Move To Platen Right End], then press the
[ENTER] key.
2. Turn off the main power supply and unplug the power cable.
3. Remove the following covers.(1.5)
(1) Front cover front
(2) Front cover upper
(3) Front cover lower right
4. Detach the absorber tray. (Claw ×4)
5. Replace the NCU Ink Pad.
6. Follow the procedure in the reverse order for assembly.
7. Select [#Adjust] > [NCU] > [NCUpad count], then press the [ENTER] key.
8. Press the key to reset the usage count.
To Next Page
Loading...
