MIMAKI TS100-1600 - 2.2.4 Carriage Height Sensor

Chapter 2 Replacement of Maintenance Parts > Sensor Related>Carriage Height Sensor
52
>
R
e
v
2.2.4 Carriage Height Sensor
1
2
l Procedure
1. Turn off the main power supply and unplug the power cable.
2. Remove the following covers.(1.5)
(1) Front cover front
(2) Front cover upper
(3) Carriage cover
3. Disconnect all connectors connected.
4. Remove the height sensor BKT.
5. Remove the Carriage Height Sensor.
6. Follow the procedure in the reverse order for assembly.