MIMAKI TS100-1600 - 1.2 Tools Required for Maintenance

Chapter 1 Maintenance > Tools Required for Maintenance
16
R
e
v
1.2 Tools Required for Maintenance
l Tool
Item Remarks
Phillips screwdriver No. 1 M2
Phillips screwdriver No. 2 M3 to M5
M3 to M5 (L = 260 or greater)
Flathead screwdriver Slot length 2.5 mm
Hexagon wrench 1.5 mm M3, 2.0 mm M4, 2.5 mm M3, 3.0 mm M4, 4.0 mm M5, 5.0
mm M6, 6.0 mm M8, 4.0 mm M5 (short type)
Ratchet screwdriver
Stubby screwdriver
7 mm across flats M4, 10 mm across flats, Phillips (No. 2)
Monkey wrench
Radio pliers
Nippers
Snap ring pliers
Tweezers
Retractable knife
l Consumables
Item Remarks
Safety glasses
Gloves Oil/chemical-resistant
Gloves
Cleaning cloth Paper towels, soft cloth
Cleaning stick
Industrial alcohol For degreasing and washing
Adhesive Instant adhesive
Cable tie L = 150 or less (UL approved item)
Tape Acetate tape, drafting tape, double-sided tape, packing tape
Grease: MP-MG-A1-GU • "Cap slider pin"(P. 22)
• "Y Drive Belt"(P. 23)
• Timing belt
Grease: MP-LONGTERM-W2-GU • "Clamp cam"(P. 22)
• "Wiper slider"(P. 22)
• "Print head"(P. 75)
Maintenance liquid 03 SPC-0881 (1,000 ml bottles ×4), EU: SPC-0882 (1,000 ml bottles
×4)
Maintenance liquid kit ML003-Z-K1 (200 ml bottle), SPC-0137 (100 ml bottle)
Maintenance liquid cartridge FL003-Z-22 (220 ml)