MIMAKI TS100-1600 - 1.3 Major Parameters

Chapter 1 Maintenance > Major Parameters
18
R
e
v
1.3 Major Parameters
l System parameters
No. LCD
display
Specified
value
Overview Unit Input range
007 FLSposY 0 Flushing Y position adjustment 0.1 mm -200 to 200
008 CapPosY 0 Capping Y position adjustment 0.1 mm -200 to 200
009 WipPosY 0 Wiping Y position adjustment 0.1 mm -200 to 200
032 INK SET 0 Ink set
• 4: 4C
Code 0x0000 to
0x00ff
109 AirVacY 0 Air suction Y position adjustment 0.1 mm -200 to 200
144 MECASIZ - 7: 160 Code 0 to 10
146 MODEL - 1: TS
5: JV
Code -
148 HASH 0 1: Ignore errors, startup with motor off Code -
149 SUPPORT 0 2: Adjustment function expansion Code 0 to 3
153 INITIAL 0 Initialization
1: All parameters
Code 0 to 255
l Ink parameters 1
No. LCD
display
Specified
value
Overview Unit Input range
000 FillUP 0x0000 Initial filling flag
0x00: Not filled, 0x03: Filled
0 to 255
249 MCrtFup 0 Maintenance liquid filling status
0: Not filled, 1: Filled
0 to 1
l Head parameters
Print position adjustment values are retained.