MIMAKI TS100-1600 - 2.1.8 Power supply (15 W, 5 V)

Chapter 2 Replacement of Maintenance Parts > PCB/Power Supply Related>Power supply (15 W, 5 V)
44
>
R
e
v
2.1.8 Power supply (15 W, 5 V)
1
l Procedure
1. Turn off the main power supply and unplug the power cable.
2. Remove the following covers.(1.5)
(1) Electrical box cover
3. Disconnect all connectors on the PCB.
4. Remove the Power supply (15 W, 5 V).
5. Follow the procedure in the reverse order for assembly.
l Connector list
No. Pin Intended use AC/DC Remarks
ZWS15B-5 LFA15F-5-J1
CN1 CN1 5 AC
CN51 CN2 2 DC
*1. For details of the ports to connect to, check the block diagram.