Chapter 2 Replacement of Maintenance Parts > Ink Supply Related>Filter
93
>
R
e
v
2.4.9 Filter
l Procedure
1. Drain the ink.
• Reference: "3.2.5 Discharge and Washing"(P. 138)
2. Turn off the main power supply and unplug the power cable.
3. Remove the Ink bottle.
4. Remove the following covers.(1.5)
(1) Rear cover upper
(2) Rear cover lower
5. Detach the fittings under the Ink Cartridge Valve and wrap in a paper towel.
• Be careful to avoid contaminating the surrounding area with ink.
• Be careful to avoid bending the ink tubes.
• Take care to avoid losing the rubber seal.
6. Detach the fittings on and under the Filter.
7. Follow the procedure in the reverse order for assembly.
2
To Next Page
Loading...
