Chapter 3 Adjustment > Adjust Menu>NCU
143
• Units: 0.1 mm (-7 = -0.7 mm)
• The NCU mounting offset with respect to the mechanical design value is displayed.
• Perform flushing for the A row of the Head 1 to detect the most sensitive sensor position.
"ERR" is displayed when detection fails.
• If "ERR" is displayed, perform the "Slant Adjust"(P. 142).
NCUpad count
Clears the NCU absorber usage count.
l Procedure
1. Select [#ADJUST] > [NCU] > [NCUpad count] and press the [ENTER] key.
2. Press the key to display the next screen.
Clear?
4852 / 254000
Exec< >Cancel
( 1%)
3. Press the [ENTER] key to reset the usage count.
3
To Next Page
Loading...
