Chapter 2 Replacement of Maintenance Parts > Ink Supply Related>Maintenance liquid cartridge valve
85
>
R
e
v
2.4.5 Maintenance liquid cartridge valve
l Procedure
1. Turn off the main power supply and unplug the power cable.
2. Pull out the maintenance liquid cartridge.
3. Remove the following covers.(1.5)
(1) Top cover
(2) Right side cover upper
4. Disconnect all connectors connected.
5. Remove the Maintenance liquid cartridge valve. (Claw ×2 each)
6. Detach the fittings and wrap in a paper towel.
• Be careful to avoid contaminating the surrounding area with ink.
• Be careful to avoid bending the ink tubes.
• Take care to avoid losing the rubber seal.
2
To Next Page
Loading...
