MIMAKI TS100-1600 - 2.3.3 Y-drive motor

Chapter 2 Replacement of Maintenance Parts > Drive Related>Y-drive motor
61
>
R
e
v
2.3.3 Y-drive motor
1
2
• [Other required tools]
(1) Push-pull gauge (P. 17)
l Procedure
1. Turn off the main power supply and unplug the power cable.
2. Remove the following covers.(1.5)
(1) Top cover
(2) Right side cover upper
3. Loosen the belt tension retaining screws to relieve belt tension.
4. Disconnect all connectors connected to the Y-drive motor.
5. Detach the Y belt and remove the Y-drive motor.
• Be careful to avoid dropping the Y-drive motor.
Tension SP-L
2