Chapter 2 Replacement of Maintenance Parts > Ink Supply Related>Ink Cartridge Valve
87
>
R
e
v
2.4.6 Ink Cartridge Valve
l Procedure
1. Drain the ink.
• Reference: "3.2.5 Discharge and Washing"(P. 138)
2. Turn off the main power supply and unplug the power cable.
3. Remove the Ink bottle.
4. Remove the following covers.(1.5)
(1) Rear cover upper
5. Disconnect all connectors connected.
6. Remove Ink Cartridge Valve (2 claws each)
7. Detach the fittings and wrap in a paper towel.
• Be careful to avoid contaminating the surrounding area with ink.
• Be careful to avoid bending the ink tubes.
• Take care to avoid losing the rubber seal.
2
To Next Page
Loading...
