Chapter 2 Replacement of Maintenance Parts > PCB/Power Supply Related>Power supply (240 W, 36
V)
45
>
R
e
v
2.1.9 Power supply (240 W, 36 V)
l Procedure
1. Turn off the main power supply and unplug the power cable.
2. Remove the following covers.(1.5)
(1) Electrical box cover
3. Disconnect all connectors on the PCB.
4. Remove the Power supply (240 W, 36 V).
• Grasp the edges when removing the PCB.
• Avoid touching PCB components or the rear surface.
5. Follow the procedure in the reverse order for assembly.
l Connector list
No. Pin Intended use AC/DC Remarks
CN1 5 Input AC
CN51 8 Output DC
CN52 2 Output DC
*1. For details of the ports to connect to, check the block diagram.
2
To Next Page
Loading...
