Installation Precautions
9
R
e
v
Installation Precautions
• Do not install the machine in a place close to fire.
• Do not place flower vases, pots, cups, containers containing cosmetics, chemicals or water, or
small metal items on or close to the machine. If they enter the machine, there is a risk of failure,
electric shock, or fire.
• Do not install this machine in humid locations or locations where it may be exposed to splashing
water. Otherwise there is a risk of failure, electric shock, or fire.
• Do not install the machine in a place where children may enter.
• A ventilation system must be provided if this machine is installed in a poorly ventilated area or
sealed room.
• Be sure to observe the following points when installing an extractor outlet:
(1) The extractor outlet must be installed in accordance with applicable local EHS
(environmental, health, and safety) guidelines.
(2) If the extractor outlet is fitted with a shutoff valve, the valve must be open when this
machine is in use.
• Do not install this machine in locations where dust or powder is present. Failure or printing
defects may result (e.g., nozzle clogging, deflection) if dust gets inside this machine.
• Do not install this machine in locations exposed to drafts (e.g., from air conditioning).
Disregarding this precaution may result in dust or powder getting inside this machine.
• Do not install this machine in unstable locations or locations subject to vibration. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to direct sunlight.
• Do not install this machine in locations subject to sudden temperature changes. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to excessive noise from large machinery.
• Do not install this machine in locations where photographic fixing agents generate vapor or acid
gas (e.g., acetic acid, hydrochloric acid) or locations filled with metal working fluids or highly
volatile substances (e.g., amines, amine-modified alcohols). Malfunctions or printing defects
may result (e.g., nozzle clogging, deflection) as print head ink is more likely to harden under
such environments.
• Operating environment: 20 to 30 °C (68 to 86 °F), 35 to 65 %RH (no condensation)
• Temperature range in which accuracy is guaranteed: 20 to 25 °C (68 to 77 °F)
To Next Page
Loading...
