Chapter 4 Testing > Test Menu>AGING
155
>
R
e
v
4.1.3 AGING
l Overview
This is used to check the continuous operation of the motors and units.
• Spread scrap media around before checking [Y Ageing] or [XY Ageing]. Doing so may result in
leaking ink.
l List
No. Item Outline
1 XY SERVO* Continuous bi-directional operation of X-axis motor and Y-axis motor
2 X SERVO Continuous bi-directional operation of X-axis motor
3 Y SERVO* Continuous bi-directional operation of Y-axis motor
4 PUMP MOTOR Continuous bi-directional operation of pump motor (maximum 24
days)
5 WIPER MOTOR Continuous bi-directional operation of wiper motor (maximum 9,999
cycles)
6 WIPE HEAD Repeated wiping operation (maximum 9,999 cycles)
7 Capping Repeated capping operation
8 CLEANING Execution of cleaning operation for the specified number of times
(maximum 500 cycles)
9 FLUSHING Repeated flushing operation (maximum 9,999 cycles)
10 X measure Continuous bi-directional measurement operation of X-axis
11 COM Used for development (PCB communication test)
12 INK SUPPLY
13 CARTRIDGE VALVE Repeated opening and closing of cartridge valve
14 Feeding/TakeUp
15 NOZZLE DETECT Continuous operation of nozzle detection unit
16 TEST FEED Continuous operation of specified field quantity
PCB communication test
l Overview
This is used to check communication between the main PCB and the other PCBs.
l List
No. LCD display PCB name
1 KEYBOARD Color LCD PCB (With LCD)
2 HDM1 Slider M PCB
3 BIO2 Base IO PCB
4 BIO1 Base IO PCB
4
To Next Page
Loading...
