Chapter 2 Replacement of Maintenance Parts > PCB/Power Supply Related>Slider M PCB
38
8. Remove the Slider M PCB.
9. Follow the procedure in the reverse order for assembly.
l Connector list
No. Pin Intended use AC/DC Remarks
CN1 60 HEAD I/F DC
CN2 60 HEAD I/F DC
CN10 9 For debugging DC
CN11 26 Slider IF connection (connection with main PCB) DC
CN12 24 Slider IF connection (connection with lower PCB) DC
CN13 6 Spare DC
CN14 14 Spare DC
CN15 10 Spare DC
CN20 5 Spare DC
CN21 40 Mark sensor, media width sensor, head height sensor, jam
sensor, encoder, LED pointer, sheet cutter, CCS
DC
CN22 6 For CCS DC
CN23 4 Spare DC
CN24 4 Spare DC
CN25 4 Heater thermistor DC
*1. For details of the ports to connect to, check the block diagram.
To Next Page
Loading...
