Chapter 2 Replacement of Maintenance Parts > Ink Supply Related>Bottle tank
90
7. Detach the Buffer Tank and the tank shade sheet.
Tank shade sheet
Buffer Tank
8. Follow the procedure in the reverse order for assembly.
• Be sure to connect the ink tube correctly.
• We recommend replacing the tube removed from the Bottle tank. If no tube is at hand, cut
approximately 5 mm off the end of the tube before reinserting.
9. Turn on the main power supply and press the [END/POWER] key.
10. Dispose of the ink in the waste ink tank and reset the waste ink tank counter.
11. Perform the following:
(1) [#Adjust] > [Fill Up Ink]
(2) Test print.
• Check to confirm the nozzle is not clogged.
To Next Page
Loading...
