19
Kaleido-X
User’s Manual
A layout browser appears on the displays associated with the current room.
3 Choose a default layout from the layout browser.
The video sources should appear on the room displays.
Example of a default layout showing 16 video streams
Note: By default, each room is associated with one multiviewer output or
output card. Most predefined layouts are configured to show all video
streams for a given input card (in the case of the Kaleido-X multiviewer
models) or all video streams connected to the multiviewer’s inputs (in the
case of a Kaleido-X16 or Kaleido-Modular multiviewer model).
Note: You can also use the 10 LAYOUT PRESETS buttons on the Kaleido-
RCP2 to load the preconfigured default layout to the monitor wall.
To Next Page
Loading...
