428
Administration and Servicing
Registering your Multiviewer's Security Credentials with your Browser
10 Click Ye s.
11 Certificate Import Wizard reports that the import was successful.
12 Click OK to dismiss the message, and then click OK to close the Certificate window.
13 Close all Internet Explorer (and Chrome, if any) windows, and then open your browser
again.
You should now be able to access XAdmin, from your multiviewer home page without
ever seeing the security warning again, unless the multiviewer’s IP address is changed,
in which case you will want to repeat this procedure.
Special note for users of Chrome
Kaleido-X, Kaleido-X16, and KMV-3901/3911 multiviewers currently use an
older version of Java to generate their certificate. For this reason, every time
you open Chrome and try to access XAdmin, you may see a warning about the
site’s security certificate. Click Proceed anyway.
To Next Page
Loading...
