71
Kaleido-X
User’s Manual
IP addresses for all the multiviewers that are on the same subnet as your PC are
included in the list.
2 If your PC and the multiviewer are on the same subnet, then you can select the IP
address of the multiviewer from the list. Otherwise type the appropriate IP address in
the box.
3Click OK.
A window appears, prompting you to confirm that you really want to import data from
the multiviewer.
4Click Ye s.
A progress window appears, followed by a message stating whether the import
succeeded or not.
5Click OK.
The imported data has replaced the former content in your local workspace. The
originating system’s multiviewer model and IP address now appear in the System list.
In the case of a cluster system, the System list shows cluster members in alphabetical
order based on their system name, which appears first and is followed by the
multiviewer model and IP address.
Multiviewer model IP address
To Next Page
Loading...
