158
19 DATA LOGGING FUNCTION
19.3 Procedure for Using
5. Set the logging target data
*1
, and click [Next].
*1 For details on the setting details, refer to the following table.
Page 172 Target data
6. Set the trigger
*1
, and click [Next]. This setting is performed only when trigger logging is selected for the logging type.
*1 For details on the setting details, refer to the following table.
Page 174 Trigger condition
7. Specify a value for "Number of records (before trigger)/Number of records (after trigger)"
*1
, and click [Next]. This setting
is performed only when trigger logging is selected for the logging type.
*1 For details on the setting details, refer to the following table.
Page 169 Number of records
Setting example 1 Setting example 2
Enter D0, D1, and M0 in the "Head" column. Enter D0, D1, and M0 in the "Head" column.
Setting example 1 Setting example 2
No setting item Proceed to step 8. • Select "Condition specification".
• Enter M0 for "Device".
•Select "" for "Conditional formula".
Setting example 1 Setting example 2
No setting item Proceed to step 8. • Enter 200 for "Number of records (before trigger)".
• Enter 500 for "Number of records (after trigger)".
To Next Page
Loading...
