872
APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
Trigger
The following window specifies the trigger condition when the trigger logging is selected ( Page 174 Trigger condition)
Number of records
The following window specifies the number of records to be output before and after trigger occurrences when the trigger
logging is selected ( Page 169 Number of records)
Item Description Setting range Default
Condition specification Configure the trigger condition based on the device
data condition.
Page 174 Condition specification Checked
When trigger instruction executed Trigger condition is established when the LOGTRG
instruction is executed.
Item Description Setting range Default
No. of records (before trigger) Specify the number of records to be output as pre-
trigger record.
0 to 99999 1
No. of records (after trigger) Specify the number of records to be logged during
and after a trigger occurrence.
1 to 100000 1
Total No. of records View the total number of pre-trigger and post-trigger
records.
2
To Next Page
Loading...
