Mitsubishi Electric MELSEC iQ-F FX5 - Page 875

APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
873
A
Output
The following window specifies the items to be output into the file. ( Page 175 Data output specifications)
Window
Displayed items
*1 Only CSV file is supported for the file format.
*2 Data output format can be created by combining the following formats.
 Year: YYYY for four-digit expression; YY for two-digit expression
 Month: MM
 Day: DD
 Hour: hh
 Minute: mm
 Second: ss
 Millisecond: ms (three-digit expression), or s, ss, sss, ssss, sssss, ssssss, or sssssss (second unit after the decimal point, maximum of
seven digits)
Example: YYYY/MM/DD hh:mm:ss.sss  2016/10/13 09:44:35.241
*3 When either of "Year", "Month", "Day", "Hour", "Minute", or "Second" is omitted, if opening the data logging file by GX LogViewer, the
index expression is used rather than the time expression.
GX LogViewer Version 1 Operating Manual
*4 If characters other than a single-byte character are used, the scan time can be long when the logging is started.
*5 You can use any characters as long as Unicode can describe them. Note, however, that you cannot use ["] (double quotation), [,]
(comma) or [;] (semi colon).
Item Description Setting range Default
Date Output date Add a time stamp to data for the data logging.
*2*3
Checked
(YYYY/MM/DD
hh:mm:ss.sss)
Set Date Line Format
*1
The date/time format to be output can be specified.
Trigger information Output trigger information Add a mark to data items that are associated with a
trigger occurrence for the data logging.
256 characters or
less

(*)
String for Indicating Trigger
Occurrence
*1
A character string to be added to the data where a
trigger has occurred can be specified.
*4
Index Output index Output the index number used for checking the logging
continuity.
 Checked
Data sampling
interval
Output data sampling interval Output the data collection interval.
Comment Output comments Output the comment at the top of the file.
Comment
*5
Input the comment in this box.
*4
256 characters or
less
(No line feed can
be used.)
LOG [Logging setting
No.]