Mitsubishi FX3U Series

FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
338
18 Other Extension Devices and Optional Units (External Dimensions and Terminal Arrangement)
18.1 Special Function Units/Blocks
18.1.22 FX2N-64CL-M
External Dimensions
•MASS(Weight): 0.15kg (0.33lbs)
•Installation: DIN rail of 35 mm (1.38") in
width or screws
•Accessories: Label for indication of special
unit/block number,
Manual supplied with product
•The connector for CC-Link/LT interface is on
the front face of the product
•The extension cable is already connected to
the extension block
18.1.23 FX2N-16CCL-M
External Dimensions
•MASS(Weight): 0.4kg (0.88lbs)
•Installation: DIN rail of 35 mm (1.38") in
width or screws
•Accessories: Label for indication of special
unit/block number,
Terminal resistor:
2 resistors for standard cable
2 resistors for high-
performance cable,
Manual supplied with product
•Terminal block: M3 screw for power supply
terminal
M3.5 screw for signal
terminal
•The extension cable is already connected to
the extension block
Terminal Layout
87(3.43")
80(3.15")
(mounting hole pitch)
90(3.55")
Unit:mm (inches)
4(0.16")
9(0.36")
43(1.7")
2-φ4.5 mounting holes
87(3.43")
80(3.15")
(mounting hole pitch)
90(3.55")
Unit:mm (inches)
75(2.96")
(mounting hole pitch)
9(0.36")
85(3.35")
2-φ4.5 mounting holes
24+
24-
SLDFG DG DA DB