Mitsubishi FX3U Series User Manual

FX3U Series Programmable Controllers
User's Manual - Hardware Edition
73
5 Version Information and Peripheral Equipment Connectability
5.5 Other Peripheral Equipment Applicability
1
Introduction
2
Features and Part Names
3
Product Introduction
4
Specifications
5
Version and Peripheral Devices
6
System Configuration
7
Input/Output Nos., Unit Nos.
8
Installation
9
Preparation and Power Supply Wiring
10
Input Wiring
5.5 Other Peripheral Equipment Applicability
5.5.1 Applicable products and versions
Caution
The GOT1000 Series is applicable to the device ranges in FX
3U PLCs. Check the applicability of other items
in the GOT manual.
5.5.2 In the case of peripheral equipment not applicable
Contents of restrictions
Programming is enabled only in the function ranges such as instructions, device ranges and program sizes
available in FX
2N and FX2NC PLCs.
*1. The F940GOT and ET-940 whose version is former than 1.10 do not support the transparent (2-port)
function of the GX Developer.
Model name Compatible versions
GOT1000 Series From first product
Model name Compatible versions
F940WGOT (with built-in 2-port interface) Ver.1.00 or later (from first product)
F940GOT(-E) (with built-in 2-port interface)
Ver.1.00 or later (from first product)
*1
F930GOT(-E)(-K) (with built-in 2-port interface) Ver.1.00 or later (from first product)
F920GOT(-K) (with built-in 2-port interface) Ver.1.00 or later (from first product)
ET-940 (with built-in 2-port interface)
Ver.1.00 or later (from first product)
*1
FX-10DM(-SET0)(-E) From first product
FX-10DU(-E) Ver.3.00 or later

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)