Mitsubishi FX3U Series User Manual

388
FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
19 FX3U-7DM (Display Module)
19.19 User (User-Registered Device Setting)
19.19.5 Program example 3 (when 5 or more devices are displayed as user-registered devices)
Use this program example as a reference when setting 5 or more devices as user-registered devices.
1. Operation
In this program example, the 7 devices shown in the table below are set as user-registered devices, with the
current value display format set individually for each device.
1) The display formats specified here apply only to current values which appear at the "user-registered
device" menu. Other current values appear in a decimal format.
2) In this program example, system information is assigned from D50 to D90 and from M50 to M56.
2. Program
Continued on next page
User-Registered Device
No.
Devices Set As User-
Registered Devices
Data Length
Display
Format
1 D100 (D101) 32-Bit Hexadecimal
2 D102 16-Bit Decimal
3 D103 16-Bit Decimal
4 D104 16-Bit Decimal
5 D200 16-Bit Hexadecimal
6 D210 16-Bit Decimal
7 D201 16-Bit Hexadecimal
MOV K50 D8300
MOV K50 D8301
M8002
System information (system No.1) is
set at D50 to D90.
System information (system No.2) is
set at M50 to M56.
K-1 D52 K6
Sets "K-1" at D52 to D57 because user-
registered devices 2 to 4 are unused.
SFTLP M60 M61
RST M60
M56 M53
[+] button ON
M61
K7 K1
M67
SET M60
RST M67
FMOV
RST M55
At Monitor/Test screens other than
the "user-registered device" screen,
the current values and setting values
are displayed in a decimal format.
M58 M67 ZRSTP
SET M60
SFTRP M58 M59
M56 M52
[-] button ON
K8 K1
M59
RST M59
SET M66
MOV K8 D50
MOV K100 D51
M60
SET M55
Initialization of the user-registered
screen's scroll flag.
Setting of flag that specifies the
default user-registered devices.
User-registered device screen scroll
program (by [+] and [-] buttons).
Sets the first device which appears at
the user-registered device screen as
a "D101, D100" 32-bit device, with a
hexadecimal current value display
format.
Initial pulse
M54
M54
M8002
Initial pulse
User-
registered
device
monitoring
in progress
User
message
display
command
User-
registered
device
monitoring
in progress
User
message
display
command

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)