Mitsubishi FX3U Series User Manual

394
FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
19 FX3U-7DM (Display Module)
19.22 Display Screen Protect Function
19.22.6 Pointers for using the display screen protect function
The display screen protect function settings should be specified in a sequence program.
• The protect function is enabled by using the display module’s "monitor/test function" to change the system
information’s (system signal 1) "D+8" current value to "1" or "2".
• Once the setting is made, it cannot be canceled from the display module.
• To cancel the setting, use the programming tool to change the system information’s (system signal 1)
"D+8" current value to a value other than "1" and "2".
If the system information’s (system signal 1) "D+8" is set in a general purpose data register, however,
the display screen protect function can be canceled by turning the power off, then on again.

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English