8.8 CF Card
8.8.2 CF card inserting/removing method with CF card interface of GOT
8 - 37
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PART NAME AND
SETTINGS
5
EMC AND LOW
VOLTAGE
DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
2 Removing
1 Set the CF card access switch of the GOT to OFF, and make sure that the CF card access LED turns
off. (When the CF card access LED turns off, the CF card can be removead even during the GOT power
on.)
2 Open the cover of the CF card interface.
Push the CF card eject button of the GOT.
(The CF card eject button is pulled out after pushing at once.)
When using other than the GT155 When using the GT155
When using other than the GT155
When using the GT155
ACCESS
OFF ON
ACCESS
OFF ON
To Next Page
Loading...
