Mitsubishi GOT1000 GT15 User Manual

14.12 Fingerprint authentication
14.12.2 Operating the fingerprint authentication
14 - 63
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
(4) Operation of Contents registered list
For logging into the GOT using the fingerprint unit, the fingerprint information of the operator must
be registered in the operator information.
Refer to the following for details of operator information.
14.11 Operator Information Management
Refer to the following for precautions when registering fingerprints.
this section (2) For registering operator
1 In the fingerprint information
management, touch the [Contents
registered list].
2 The administrator password
authentication screen is displayed.
3 After the administrator password is
correctly input, a list of fingerprint IDs
registered in the fingerprint unit is
displayed.
4 To register a fingerprint ID, touch the
button.
Touch the button after selecting a
fingerprint ID to delete the selected ID.
Touch the button to delete all
the registered fingerprint IDs.
REG
DEL
DEL ALL

Mitsubishi GOT1000 GT15 Specifications

General

Display Size	10.4 inches
Display Type	TFT Color LCD
Resolution	640 x 480 pixels
Touch Panel Type	Analog resistive film
Power Supply	24V DC
Backlight	LED
Protection Rating	IP65 (front panel)
Interface	RS-232, RS-422/485, USB
Operating Temperature	0°C to 50°C
Memory	9 MB
Storage Temperature	-20 to 60°C
Display Colors	256 colors