Molecular Devices FLIPR Tetra User Manual

Exchanging Hardware
136 0112-0109 H
Removing the Tip Block and Gasket
During the unloading, the tip block grippers will unclamp and release
the gasket and tip block into the rack assembly. Once unloaded, we
recommend you dispose the gasket and use a new one the next time
the block is loaded. Ordering information for disposable gaskets can be
found in Appendix C: Consumables and Accessories on page 283.
If you intend to use Position 1 for a source well plate, load tips
manually and then remove the tip rack prior to starting an experiment.

Molecular Devices FLIPR Tetra Specifications

General

Brand	Molecular Devices
Model	FLIPR Tetra
Category	Laboratory Equipment
Language	English